The Best Way to Eliminate Milk Odour from Carpet

There aren't much things that can smell as bad as sour milk. Once spilled, the milk quickly seeps into the carpet, and if not treated on time, it can spoil and leave an overwhelming odour that may seem impossible to remove. Even if you remove the milk spill, the odour may remain. Fortunately, there are several simple homemade solutions you can use to freshen up your carpet.

If you have hydrogen peroxide in home, pour some on the stain and allow it to dry on the carpet. The hydrogen peroxide will neutralize the milk odour, and its own smell will fade after a few days. According to carpet cleaning Clapham team, you can use club soda instead of hydrogen peroxide, but it may require multiple applications before the odour vanishes.

Vinegar is one of the most effective and common natural cleaners. Combine together equal parts of white vinegar and water, then pour the mixture onto the stain. If the stain is older, a stronger vinegar concentration might be required. Carpet cleaning Clapham team suggests to leave the vinegar work on the stained area for at least 30 minutes, then soak it up and vacuum the carpet to remove any remainders of the solution. The smell of vinegar will fade after the carpet dries.

Some products, such as baking soda and dry coffee grounds, will absorb the milk out of the carpet, removing the odour and any remaining stain. Sprinkle enough amount of baking soda or coffee grounds on the stained area and leave for overnight. Vacuum the carpet, and the milk odour will be gone.

Before applying any cleaning product to your carpet, test it on a hidden area to make sure it won't damage the colour or integrity of the carpet.

Easy Green Cleaning Recipes

Today we use more dangerous cleaning products and detergents which endanger our health. In fact these are just part of everything that is unhealthy, so we can try to make everything that surrounds us more eco-friendly. Let's start with the cleaning because here are the easiest green recipes.
 

All Purpose Cleaner 

This is a solution which can be used for every part of the house. You can make the mixture by yourself using 2 spoons Borax, 2 cups water and a quarter of lemon juice. Put these ingredients in a spray bottle and start cleaning. 

Stain Remover 

It is very useful for carpet stains and you need only club soda and baking soda � products which every housewife has. When the stain appears, you should blot it first and then sprinkle baking soda. Blot again using club soda and there will be no spot at all. 

Glass Cleaner

The ingredients you need are a cup of water, a cup of alcohol and a tablespoon of vinegar. Put all these products in a bottle and spray the glass. Then wipe out using clean cloth or newspaper, which is even more useful because it prevents streaks.

These are the most useful and easy green cleaning recipes you can find and they are recommended by the leading domestic cleaners. If they are not helpful enough, you can get a cleaner to make sure the job was done properly.

A Few Good Tips How to Treat Your Jordan Shoes Properly

Playing basketball is a lot of fun, many people believe that having good shoes is one of the keys to win. Everybody knows who Michael Jordan is � one of the greatest players the game have ever seen. During the time he plays in the NBA, Nike starts to produce shoes and put his name on them. This is the beginning of one really successful brand. Wearing Jordans( how they are called for short) is something imperative, especially if you consider yourself a good player.

Besides wearing one pair of those you will need to clean them as well. According to some cleaners in Melbourne, you need to follow those steps tightly, according to some others � that is not necessary.

If you pair is made of suede here is what you need to know.

• Use protective spray that repels water. Keep them away from water as much as possible. In case they get wet don't use hair drier. Blot up with towel and let them dry naturally.
• To restore the nap you can use the power of steam. Just hold the above the streaming pot.
• In case you are using with any cleaning product, apply first on a small area to see how it will react to the cleaner, that could save you some troubles.
• When cleaning suede shoes don�t press hard, but rub gently instead.
• Another thing you could try, is to use nail file to remove mud and scuff marks.

Taking good care of your favourite basketball shoes might demand a little assistance or an advice. But it's nothing hard, it's not like doing one really deep cleaning at the end of your rental contract, right? Well in this last case you could use vacate cleaning Melbourne has got, and I'm sure they will fix everything in no time.

Remove the Wood Furniture Stains

There is some type of wood furniture in every home, because this is the best way to make your house look cosier. The problem with this furniture is the cleaning as it is very easy to make a stain on wood table but sometimes it can be hard to remove it. Here are four recipes, which will help you to enjoy spot-free wood furniture for longer.

The solution you are going to use depends on the origin of the stain. For example, there is no need to call domestic cleaner, if you spilled just some milk or alcohol drink. 

Instead you'd better use wax or ammonia, which is going to remove the white mark from the wood surface.

For other white marks, you can use a mixture made of lemon juice and cigarette ash. In case you don't have lemons, try with salad oil and you will see that the result is the same.

Talking about cigarettes, we can tell you how to remove a cigarette burn. Just use a sealing polisher and then apply linseed oil to make it shiny again. You can skip the polisher, if you don't have any.

The biggest problem when it comes to wood furniture, is how to deal with the water marks and rings. The truth is that you can handle them very easily, using home-made solutions. You have two options so choose between: toothpaste or oil to rub with. There is another way, which even more useful. Cover the spot with a cloth and press a hot iron to it; this way the moisture will be absorbed.

As you can see, you don't need domestic cleaners but fifteen minutes of your time to read this post and you won't see stains on the wood furniture any more.

Top 10 Tenancy Deposit Solutions

   When the tenancy period ends the time for thinking about getting your security deposit back has come. The top ten ways to insure that are all related to cleaning. After an appropriate notice leaving the tenancy in a good condition is the next major step.

1. Of course, moving out cleaning services are the best solution. However, if the price for hiring such a company is equal to the amount you have deposited than it is surely not worth it. If this is the case just leave the tenancy in its current condition and the deposit as well.


2. Doing the cleaning yourself by having a moving out cleaning company's checklist or one from the landlord has to be the second best solution. However, if you consider doing this you will have to commit yourself and to have the spare time required. With the whole boxing, moving out and cleaning you might need several days.


3. Cleaning the tenancy to bring it in the condition that it was when you moved in. A good memory may be required if you have moved in a long time ago. As in the previous point you should buy cleaning products, equipment, boxes and plastic bags for all the trash. Collect everything around the house and do not leave anything in cabinets or drawers.


4. Cleaning yourself by the landlord's guidance. Not many propery owners would turn up to that by it is worth the try.


5. Reparation work could even be ranked higher. Make sure there isn't any damage to the tenancy. Permanent possessions, walls, carpets, curtains should all be in the same state as when you moved into the place.


6. To make a good impression clean thorougly. Details are important. Do not forget cleaning the refrigerator and the oven.


7. Cleaning while collecting your possesions. Certainly a good way to spot every uncleanliness.


8. Having someone to help is also a good solution. Cleaning and repairing would be much easier if you are not alone.


9. Preparing for the move out long before it happens. A month preparation is surely going to help but few people choose to start cleaning and fixing that early.


10. Keep the tenancy clean during the whole rental period. This could even be ranked top of the list. :)

How to Reduce Dust in Your Home

The dust in our properties is probably our biggest problem, because it can cause to our families some serious health diseases, such as asthma, lung diseases and different kinds of allergies. Therefore, we have to find the most effective way to fight this threat. Unfortunately, we cannot remove the dust from our properties completely, because it is everywhere and it just cannot be otherwise. However, we can at least try to reduce the amount of dust in our homes.

For instance, you can ask some of the professional London cleaning companies to explain to you how to minimize the dust at your home. On the other hand, you can continue reading this article to find out how to can handle the job, by yourself.

1. You can try to save a little money and purchase a new, throw-away air-filter. These types of filters will protect your home by collecting and holding the dust. Also, your new air-filter will last much longer, than if you buy some other, cheaper or already used one.

2. Another thing, which you can do to reduce the dust in your home environment is to clean your property regularly. Do not skip your everyday domestic cleaning duties. This is the biggest mistake, which you can do. Dusting your home, two or three times a week, will make you feel calm and confident that you are living in a safe home environment. When dusting, you have to move your furniture and clean all the hidden or hard-to-reach areas. Do this cleaning procedure, at least once in every two weeks.

3. Professional London cleaners recommend to vacuum regularly. It is really important to use your vacuum cleaner at least twice a week. This way, you will gather all the dust from your floors and carpets. 

Eco-Friendly Windows Cleaning Tips

You may claim that you know how to clean windows, but if you already know how to do it, why are all windows of your home are dirty? Most people are used to purchase one of the windows cleaning agents in the store and give in cleaning. Although these cleaners may seem harmless, they can cause allergies as they contain perfume and preservatives.

Spray cleaners create a fine mist of chemicals which are easily inhaled and can spread all over your home. To avoid any skin irritations and health problems, you'd better use natural cleaning products to clean your windows. If you have no idea which these cleaners are, here you'll find information about them and several cleaning recipes with them.

Many cleaning London professionals claim that white vinegar is the best cleaner for windows . So let's try it. Mix a 50/50 solution of white vinegar and cold water in a spray bottle. You can add 4 drops of your favourite essential oil to leave a lovely smell in your home. For deep windows cleaning, spray a little of the cleaning mixture directly on the window or on a soft cloth to remove grease and grime.

Plain soda is another great windows cleaning agent. Pour plain water in a spray bottle and utilize on windows. It takes longer to dry than white vinegar, so use a dry, lint-free cloth to make your windows shine.

If you haven't cleaned your windows for a long time and they've accumulated a great amount of grease and grime, then you'll need a little more cleaning power. Mix in a spray bottle:

• 2 parts of cold water
• 1 part of white vinegar
• � tablespoon of eco-friendly dishwashing detergent

Spray on the window and wipe with a squeegee mop. Cleaning London experts recommend that you clean your windows from tip to bottom. Use a dry, lint-free cloth to dry the window and remove and dust and grease. You may need to repeat the procedure several times to get your windows really clean.

How to Remove Red Wine Stains from Wool Carpet

When red wine is spilled on your wool carpet, you should take steps to remove the stain immediately. The wine will set into the carpet fibers, making a permanent red stain if you neglect the prompt intervention.

There are many household items good in removing fresh wine stains. Whether you will use club soda to douse the affected area and then blot with a clean cloth, or you will use salt to absorb the red wine, this really doesn't matter - the important is to act quickly before the wine spillage dries. To deal with a freshly spilled wine, you will need mild detergent, clean cloths, distilled white vinegar and a sponge.

Instructions

1. Combine 1 teaspoon of mild detergent, that doesn't contain bleach or alkali, with 1 cup of lukewarm water.
2. Saturate a clean rag with the detergent solution and blot the wine-stained area. While blotting, keep switching the rag to a fresh section of it. Acton cleaners recommend avoid rubbing the stained area, and try to blot from outside of the stain inwards.
3. Dip another clean rag into a solution of one part of white distilled vinegar and two parts of cool water. Use the rag to blot up any remaining stain and the soap residue.
4. Rinse the area using a sponge dampened with fresh water. If the wine stain is still visible, blot again with the detergent solution, then rinse with the sponge.

When using white wine or club soda as a cleaning solution, avoid saturating the carpet. Also, some professional carpet cleaners, including carpet cleaning Clapham team, dislike the use of salt to remove wine spills, as there is a slight opportunity the salt to damage the carpet colours.

How to Clean Carpets with Vinegar and Windex

Using a mixture of vinegar and Windex to clean your carpet can produce the same cleaning results as most professional carpet cleaning services will achieve. When mixing a cleaning solution, do not mix vinegar or Windex with chlorine, as it will create harmful vapours.

Cleaner Clapham suggests to keep the windows open when you are making cleaners because the vapours can be overwhelming. The things you will need to clean the carpet with your own cleaner are Windex, white vinegar, steam cleaner, scrub brush and a terry cloth.

Instructions for Steam Cleaning Solution

1. Pour a mixture of � cup of vinegar and � cup of Windex into a steam cleaner, and fill the rest of the steamer's reservoir with hot water. You can rent or buy a steam cleaner from most supermarkets.
2. Clean the entire carpet with the steam cleaner, following the manufacturer's directions.
3. Open the windows to help the carpet dry.

Instructions for Spot Cleaning

1. Buy Windex Multi-Surface Spray with Vinegar, and saturate the stained areas of the carpet using the spray.
2. Use a scrub brush to rub the Windex and vinegar solution into the carpet fibers.
3. Use a terry cloth to blot the saturated area until the excess liquid has been soaked up.
4. If the stain is still visible, repeat the process. If this doesn't work, consider calling carpet cleaning Clapham team.

Although, the Windex is meant for window cleaning, it can be also used for cleaning a variety of other surfaces in your home. Check on Internet to find out what other uses the Windex have.

How to Clean Carpet with Ammonia

Stains become more difficult to remove with the time they sit on the carpet. Ammonia is a colourless liquid, that can effectively clean up soft drinks, blood, chocolate, urine and glue from carpets if used properly. Because of ammonia's strong odour, you should dilute it with water and air ventilate the room while cleaning with it.

Here are several easy steps, suggested by cleaner Clapham, to follow when using ammonia:

1. Get ammonia, water, a plastic bowl, a spray bottle, white paper towels and a heavy book, then proceed with the next steps.
2. Pour 1 cup of water into a plastic bowl, then add 1 tablespoon of ammonia to the water and stir the ingredients thoroughly. Alternatively, you can directly pour the water and the ammonia into a spray bottle and shake it to mix the solution.
3. Thoroughly saturate the stained area with the ammonia solution and let it soak into the carpet for ten minutes.
4. Soak up the solution from the carpet using white paper towels. After you have absorbed as much liquid as possible, cover the damp area with thick layer of paper towels, then place a heavy book on the towels and leave it sit for overnight.
5. In the morning, remove the book and paper towels from the carpet, and inspect for any dirt left. If the carpet is still stained, repeat the process.

Exposing your pets to ammonia can disrupt their house-training, so make sure your pets are isolated in another room until the specific odour of ammonia disappears. If the stain is too tough for you to remove it, consider using carpet cleaning Clapham services to get your carpet stain free.

How to clean your Apple iPod (all models)

1.       Unplug all cables and turn off iPod touch (press and hold the Sleep/Wake button, and then slide the onscreen slider).

2.       Use a soft, slightly damp, lint-free cloth to wipe over the surfaces. Avoid getting moisture in openings. Don�t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean iPod touch.

How to clean your Weber BBQ (or similar charcoal BBQ)

1.       Use a stiff wire brush to scrape away any loose debris from the grill and grates, and then remove the grill and grates.

2.       Scoop out any ash at the bottom of the barbecue.

3.       Clean using dishwashing liquid, water and a plastic scrubber (not abrasive cleaners and metal scrubbers). If your barbecue does not have a painted, non-stick or an aluminium surface, clean the inside and outside of the barbecue with baking soda (or another abrasive cleaner) and a little water using a metal scouring pad.

4.       Place the grill and grates in a large plastic bag and cover them thoroughly with oven cleaner. Allow them to sit for several hours or overnight. If the grill and grates are aluminium, soak them in dishwashing liquid and water instead.

5.       Remove the grill and grates from the plastic bag and place them atop several layers of newspaper.

6.       Use a metal scouring pad or stiff brush to scrub them clean. If the grill or grates are aluminium or non-stick, use a plastic scrubber, not a metal one.

7.       Hose off the grill and grates to remove any remnants of the oven cleaner. Use the hose to clean out the barbecue itself as well.

8.       Allow everything to dry thoroughly before replacing the grill and grates.

9.       Coat the grill with vegetable oil to prevent rusting and future build-up.

How to clean a gas BBQ

Whilst cleaning your BBQ, check the flexible hose for cracks and damage and replace if necessary. Consult your owner's manual for any specialised maintenance requirements. Ensure the gas is disconnected and check the metal tubes under each burner. Spiders and other insects like to nest in these tubes. Use a paper clip or toothpick to clear these holes if necessary. Remember that many gas grills are made of aluminium products, so you'll want to avoid abrasive cleaners, including oven cleaner, metal brushes or scouring pads.

1.       Soak the grill and any removable parts in dishwashing liquid and hot water. Scrub away any build-up of grease with a rag, sponge or plastic scourer.

2.       Remove the flame bars and run them through the dishwasher. Or scrub them with a brass wire brush.

3.       Replace the lava rocks every year with new ones or boil them in soapy water to remove built-up grime.

4.       Tape over any gas openings and then clean the inside of the barbecue with hot, soapy water and a rag, sponge or plastic scrubber.

5.       Clean the outside of the barbecue with hot, soapy water and a rag or sponge.

6.       Hose out the barbecue. Allow it to dry thoroughly before you replace all of the parts.

7.       After everything is dry, rub the grill with vegetable oil and any wooden parts with linseed oil.

8.       If you have a quick disconnect, make sure it is securely fastened before you use the grill.

How to clean your Apple iPhone (all models)

Clean the iPhone immediately if it comes into contact with any contaminants that may cause stains, such as ink, dyes, makeup, dirt, food, oils, and lotions.

1.       Unplug all cables and turn off iPhone (press and hold the Sleep/Wake button, and then slide the onscreen slider).

2.       Use a soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don�t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean iPhone.

3.       The front and back glass surfaces have an oleophobic coating. To remove fingerprints, simply wipe these surfaces with a soft, lint-free cloth. The ability of this coating to repel oil will diminish over time with normal usage, and rubbing the screen with an abrasive material will further diminish its effect and may scratch the glass.

How to clean an Apple Macbook / Macbook Pro / Macbook Air

1.       Ensure your MacBook, MacBook Pro, or MacBook Air is shut down and the power adapter has been disconnected.

2.       Use a damp, soft, lint-free cloth to clean the computer�s exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the computer. Do not use aerosol sprays, solvents, or abrasives that might damage the finish.

3.       To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen a soft, lint free cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.

4.       To clean the bottom case of the MacBook, use a 3M Gray Microfiber or soft dye-free, lint-free cloth as the bottom of the case uses a soft non-slip material.

How to clean an Apple iPad

1.       Ensure the iPad is turned off. Although only a small amount of water will be used, it is not wise to clean the iPad with it on.

2.       Disconnect any wires or cables and remove the case (if present).

3.       Take a microfibre cloth and apply a small amount of water so that the cloth is damp. Make sure that the cloth is not dripping as this clearly can be dangerous to your iPad. DO NOT use any other type of cleaner including window cleaner, aerosol cleaner, or any other chemical cleaner.

4.       Using the damp cloth, gently rub all of the exterior surfaces of the iPad. Do this until you have wiped away all of the smudges on the screen and casing. Avoid getting water into the openings. The iPad has an oleophobic coating on the screen, the ability of this coating to repel oil will diminish over time with normal usage, and rubbing the screen with an abrasive material will further diminish its effect and may scratch your screen.

5.       Use the dry portion of the cloth (or another one if necessary) to dry off the phone, failure to dry properly will leave streaks. Make sure the iPad is completely dry before turning it back on.

How to clean a pool table

1.       Start by cleaning the edges of the table (the non-felt portion of the top of the table). Brush off any dirt, either onto the felt or the floor. Use any standard cleaner and a cloth to wipe off the surrounding edges of the table.

2.       Use a hand brush to sweep any dirt from the felt and into the pockets of the pool table. Do so gently, so you don't damage the felt. Only worry about the dirt and chalk particles you can see, as you will be wiping off the table later.

3.       Run a hand-held vacuum cleaner along the felt of the pool table. This will collect any dust you missed when sweeping the table. Attach a hose to the end of your normal vacuum cleaner and clean out the pockets of the pool table.

4.       Use a pool-table cleaner to remove the dirt that is deep in the felt. Quick-Clean Pool Table Cleaner is one such product you can use. Place the product on the felt and let it sit for 60 seconds. Use a cloth to remove the cleaner from the felt. Be sure to wipe the entire cleaner from the felt. The cleaner will not leave the felt of your pool table damp.

5.       Wipe down the remainder of the outside of the table, including the legs and around the area where the balls gather after they travel through the ramps. Any cleaning product (including Pledge or Murphy's Oil) will be fine.

How to clean gold-coloured taps

Gold-coloured fixtures are a beautiful addition to a home. In the kitchen or bathroom, gold taps can make even the most drab of rooms look regal. Most gold taps are made of brass, although some older models may be made of gold or copper. Regardless of the material they're made with, you can achieve a beautiful shine on your gold fixtures with minimal upkeep and a few household cleaning items.

1.       Make a habit of spraying a little bit of ammonia on the rag a few times a week. After using the tap, wipe the fixture with the damp rag. This helps maintain shiny gold taps with minimal upkeep.

2.       If your fixtures are antique, they may require some more effort to keep them shiny and clean. They also may not react well to some commercial cleaners and are probably not made out of brass, but gold or copper. Heat linseed oil over the stove, dip a rag in the warm linseed oil, and rub vigorously on the taps. This gently cleans antique fixtures without being too abrasive.

3.       Use vinegar, salt and flour to polish neglected taps. If you have a brass tap that hasn't been cleaned in quite some time, mix vinegar, salt and flour into a thick paste. Rub vigorously with a rag or sponge and leave the mixture on the tap for 10 minutes. Add a small amount of hot water, scrub the tap, and then rinse with hot water.

4.       Use commercial brass cleaner on particularly tough jobs. Commercial brass cleaners contain harsh chemicals that take the tarnish off of your tap easily. Spray or rub onto the taps, let sit for 10 to 20 minutes, then rinse carefully. Always wear gloves when using commercial brass cleaners.

5.       Continue cleaning your gold coloured fixtures regularly. Once you have gotten your taps clean, keep them that way by wiping your taps regularly after using them.

How to clean taps

There are commercial products but you can also you can use a vinegar and water base. Ensure there are no electrical devices plugged in or left on the counter top.

1.       Start by giving the taps a good spray, leave for a few minutes.

2.       Use a toothbrush to scrub around the edges of your tap and the base of your tap, and then down in where the handles join the base. This is where the calcium builds.

3.       Use a cup of water to rinse off the chemical or cleaning solution.

4.       Dry with paper towel, to polish it dry.

How to clean stereo speakers

1.       Remove the grille from the speaker. Be careful doing this as you do not want to damage the grille.

2.       Clean the grille of your speakers. The grille on your speakers can get dusty. If they are not catching dust they are not working properly. If the grille is a fabric one you can vacuum it to get rid of the dust. If the grille is soiled or stained gently rinse with warm water and lay them out to dry before putting them back on. If the grill is metal or plastic the best way to clean them is by using a cloth that is either dry or a little damp.

3.       Clean the driver in the speaker. Dust can accumulate in the drivers. When removing the dust use a soft bristle paintbrush. If your drivers have become very dusty because you do not have grilles on your speakers you may want to begin to use them.

4.       Look for other areas within the speakers that have accumulated dust. Use a dry cloth or paint brush to remove any other dust in the speakers.

5.       For sensitive small parts of the speaker use a micro-fibre cloth to remove the dust.

How to clean a Nintendo DS cartridge

These game cartridges are small and very sensitive. As they are electronic, be very careful when cleaning and don�t spray the cartridge with chemicals.

1.       Use something soft and small (like a cotton bud) to gently wipe the fibres on the electronic parts of it.

2.       If you've really spilled something on there and it's stained, use just a tiny drop of alcohol on your cotton bud.

3.       Use a microfibre cloth to wipe away any smudges or materials that may be on the outside of your Nintendo DS cartridge.

How to clean a digital camera

To be safe, always clean with the materials that are recommended for cameras and take special care as replacing camera parts can be very expensive.

1.       Thoroughly clean the exterior of the camera with a soft, dry lint-free cloth. These can be purchased at a camera store or you can use any chemical-free soft cloth you have available. Clean the exterior first to prevent dust and dirt from falling into the camera when you remove the lens.

2.       Clean the mirror and the focusing screen gently with a can of compressed air (available from Dick Smith Electronics or Officeworks) or a Giotto�s Rocket Air blower (available at Ted�s camera stores). You can also lock up the mirror and clean the sensor with compressed air if it is required. Never touch the sensor or use anything on the sensor besides air. The sensor is only exposed when the mirror flips up during exposure. While you need to clean the focusing screen and mirror regularly, it is unusual to have to clean the sensor. Since replacing the sensor is very expensive you should take it to a camera service specialist if you are not sure. Usually the camera and mirror will only have dust to clean off. Hold the camera body face down when cleaning so the dust will fall off. If the mirror is smudged you can use a small amount of lens cleaner and lens tissue to clean it.

3.       Clean the front element of the lens with air to remove the dust. If the lens is smudged use lens tissue and a small amount of lens cleaner to clean off the smudges. Make sure you remove the filters and clean both sides of the filter as well as the front of the camera lens.

4.       It is very important to clean the rear element of the lens. The light is more focused when it passes through the rear element and dust on the rear elements will attract heavier particles than the dust on the front element. Clean the rear element in the same manner as the front element with air and then lens tissue and cleaner.

5.       Clean the camera back and top glass areas. Always clean the eyepiece in the same way you clean any lens. The operating screen and viewing screen are not as critical as the other glass parts of a camera, but clean them the same way as the lens. It is very important to be consistent in cleaning your camera. Never use any cleaning supplies that are not manufactured for camera cleaning. Windex and other alcohol-based cleaners will damage camera elements. Facial tissue and paper towels are manufactured with chemicals that could damage camera elements.

How to clean an LCD computer monitor

There are a few products that can actually harm the LCD monitor so it is important to ensure that products containing acetone, ethanol alcohol, ethanol acid, ammonia, and methyl chloride are avoided. Different manufacturers have different ideas of what you can use or can�t use on their monitor. Some say a damp cloth with water and just a little bit of soap would be okay. Others say it won�t be okay. To be safe, you may want to consider using wipes specially formulated for use with LCD screens.

1.       Turn your monitor off

2.       Lightly spray the monitor with water or detergent if the manufacturer approves.

3.       Wipe the monitor down with a soft cloth or wipes formulated for use with LCD monitors.

How to clean the inside of your PC safely

First check your owner's manual to see if the manufacturer has provided any specific cleaning instructions. If they haven�t, follow the instructions below.

1.       Gather the following supplies: a can of compressed air (available from Dick Smith Electronics or Officeworks), a specialised electronics cleaner (such as Endust for electronics) or any household plastic or metal cleaning fluid, a soft brush (such as a paintbrush) and an anti-static rag, plus a dust mask if you're allergic to dust.

2.       Shut down the computer.

3.       Leave the computer plugged into the surge protector (if you have one).

4.       Disconnect all peripherals from the computer.

5.       Remove the computer cover (see your owner's manual for instructions).

6.       Ground yourself to the computer with any professional grounding equipment or by touching a metal part of the chassis.

7.       Spray compressed air on the fan blades, power supply chassis, drive chassis and circuit boards.

8.       Gently brush off dust that the compressed air didn't dislodge.

9.       Brush any remaining dust out from the bottom of the chassis.

10.    Spray your specialised electronics cleaner or another cleaning fluid onto an anti-static rag.

11.    Wipe the inside and outside of the cover thoroughly.

12.    Replace the cover and reconnect the peripherals.

How to clean a flat screen TV

1.       Turn off and disconnect your TV before you clean it. This will more clearly show the dirt and smudge and is safer.

2.       Choose either lukewarm water or a cleaning solution to clean your TV. Commercial cleaning kits that include both a cloth and cleaning solution are available. These cleaning solutions are specially formulated to clean flat screen TVs and monitors safely and are specifically labelled safe for "laptop screen" or "LCD screen." If you wish to use a solution, ensure it is marked thusly.

3.       Dampen a soft cloth (preferably chamois, micro fibre or 100 per cent cotton) with either the lukewarm water or cleaning solution. Just a gentle wiping of the screen is enough. Rubbing, scrubbing and hard pressure can damage the screen.

4.       Dust your TV and its screen regularly to avoid a build-up of dust and damage.

How to clean your laptop fan(s)

1.       Locate your laptop�s inlet and outlet vents (usually on the bottom, side or rear of the laptop).

2.       With a can of compressed air (available from Dick Smith Electronics or Officeworks), spray compressed air into the vents to remove any dust build-up.

3.       Repeat once a month to ensure there is no dust build-up.

How to clean spills out of a keyboard

1.       Unplug the keyboard.

2.       If you spilled water, turn the keyboard over and let it drain and dry out for at least 24 hours.

3.       If you spilled something sticky, try prying the small key caps off of the keyboard with a flathead screwdriver to get better access to the mess. Don't remove the spacebar, the Enter key or other large key caps. (Take a picture of the keyboard layout, or make a quick sketch of it, before you remove any keys so you can put them back where you found them.)

4.       Gently clean the keyboard with a wet cotton swab. Use either hot water or rubbing alcohol to get rid of the sticky residue.

5.       Replace the key caps after rinsing them and letting them dry.

6.       Let everything dry for at least 24 hours before plugging the keyboard back in

How to clean spills out of a laptop

1.       Shut down the computer immediately.

2.       Wipe up any liquid and tilt the laptop to the side to drain any liquids.

3.       Disconnect and move any external accessories from the laptop, including the power cord, printer and mouse cables, CD drive, external hard drive, modem and battery, don�t remove internal parts.

4.       Once the external accessories have been disconnected and moved, gently lift the computer and turn it to the side and upside down to drain any liquid. Tilt the computer in a variety of directions to verify that there are no pools of liquid lurking, but be careful not to shake it or handle it roughly.

5.       Repeat with removable accessories.

6.       Use a hair dryer on a cool setting to dry the laptop and its accessories if you can.

7.       Allow the computer and its accessories to dry for 24 hours before you turn it back on (or an hour if it�s urgent).

8.       If the computer does not work properly or does not turn on, take it to a professional.

How to clean a computer keyboard

Ensure you have a can of compressed air (available from Dick Smith Electronics or Officeworks), a soft clean, a nonabrasive household cleaning fluid suitable for cleaning plastic and a dust mask if you're allergic to dust. Also ensure you check the owner�s manual to see if the manufacturer has provided specific instructions. It is also best the computer is shut down and the keyboard is disconnected:

1. Use compressed air to clean between the keys. Spray at an angle to dislodge dust and grime. 
2. Shake loose dust gently out of the keyboard.
3. Spray a small amount of the nonabrasive household cleaning fluid onto a cloth.
4. Wipe the keys and chassis.
5. Once the keyboard is dry, reconnect it to the computer.

How to clean a carafe-style coffee maker

1.       Fill the carafe halfway with cold water. Add distilled white vinegar to fill the carafe completely. Pour the mixture into the reservoir.

2.       Place the carafe in the brewing position. Run the brewing cycle until 3 to 4 cups of the vinegar and water solution run through. Turn the pot off and let it rest for 45 minutes. Run the remaining solution through the brewing cycle and then pour it out. Let the carafe cool completely.

3.       Fill the reservoir with clean water using the carafe. Run the water through a full brewing cycle and then discard. Let the carafe cool before repeating this step again.

4.       Place 4 tsp. of salt with 1 cup of crushed ice cubes into the cooled carafe. Add 1 tbsp. of water. Swirl the solution around in the carafe until the coffee stains disappear. Rinse the carafe thoroughly.

How to clean a coffee machine

Professional technicians or repairers should always be called upon for anything more serious than a general clean. However, if you clean your coffee machine consistently, you won�t need to call in the professionals too often. If you are ever unsure as to the cleanliness levels of your coffee machine, pull a cup without using any coffee and examine the water�would you/could you drink it? If the answer is no on both occasions, it�s definitely time for a clean. Cleaning is recommended after every 80 brewing cycles for soft water and after every 40 brewing cycles for hard water:

1. Remove all drip trays and soak in soapy, lukewarm water. Do not put any soap directly into your coffee machine. Rinse all soapy water off before replacing parts.
2. Remove and clean milk wand with pipe cleaner and soapy water. Rinse soapy water off. Let off steam without actually frothing milk, to cleanse the wand internally.
3. Remove any used ground coffee from group handle immediately after brewing. Rinse off the filter basket with warm water. Scrub the portafilter and filter basket with a scourer if any brown-black residue is left behind.  Do not use any soap.
4. Wipe down your machines �shower-head� with a clean damp cloth after every use. Again, no soap here.
5. Be aware of the calcium levels of your tap water, you may have to think about using distilled water if calcium levels are too high.
6. For a moderate internal clean: If your coffee maker isn't significantly clogged, white distilled vinegar may be your best option. Simply fill the reservoir halfway with cold water and halfway with white vinegar. Put a clean filter in the basket, and turn on the pot. Allow the machine to go through its entire cycle and then discard the water and vinegar mixture. Refill the reservoir with clean cold water and run through a normal cycle again. Discard the water and refill with clean water once more. Run the machine again to flush out any remaining debris and get rid of the vinegar scent. If you simply can't tolerate the smell of vinegar, lemon juice may be used instead. Lemon juice is acidic, which means it will eat away at any mineral deposits, but it also leaves behind a pleasant smell. Lemon juice is not recommended for severely dirty or clogged coffee makers, however. Use the same technique for cleaning with vinegar, and continue brewing with cold water until you can no longer smell lemons.
7. For a heavy duty internal clean: For severely dirty coffee makers, vinegar or lemon juice may not be strong enough. If the state of the machine is affecting the taste or smell of the coffee, the brewing time or the heating element, a commercial product may be your best bet. A professional lime and rust remover will get rid of the toughest mineral deposits inside your machine. To use, fill the reservoir with cold water and then add 2 tbsp. of liquid lime and rust remover. Turn on the machine and run it through a regular cycle. When done, empty the water and refill the reservoir with clean water. Run through once more and then you should notice a considerable difference. Cleaning your coffee pot regularly with vinegar or lemon juice will prevent it from becoming severely dirty and will reduce the need to use chemicals.
8. Pull a cup without actually using any coffee and throw it out without drinking it or tasting it, immediately after de-scaling your coffee machine. Repeat this once or twice to make sure all the toxic agents have been removed.
9. Shine the exterior chrome of your espresso machine as often as you like.

Never submerge your coffee maker in water, as this will damage the electrical components

Effective Natural Cleaning Solution for Carpets

The chemicals contained in most commercial carpet cleaners can cause skin irritation. Natural cleaning products are soft to the skin and carpet fibers, also they are much cheaper than commercial ones.

A natural cleaning solution can be made of common household items. The described solution is suggested by cleaner Clapham, and can be used with or without carpet cleaning machine.

1. Get the following items: white vinegar, distilled water, spray bottle, baking soda, towels and a vacuum cleaner.
2. Combine equal parts of white vinegar and distilled water in a spray bottle, then add � cup of baking soda. Mix well!
3. Spray the mixture directly on the stained area or pour it into the reservoir of your carpet cleaning machine. Let the vinegar solution sit on the stain for around 10 minutes before blotting it up with a clean towels. Continue blotting until the carpet is nearly dry, or use the carpet machine to suck up the moisture.
4. For stubborn stains, make a pasty solution of equal parts of white vinegar and baking soda. Put rubber gloves on your hands and rub the paste into the carpet. Wait for 10 minutes, then mop it up with a clean towel.
5. Once the carpet is dry, sprinkle a liberal layer of baking soda, and leave it to sit for several hours before vacuuming. Baking soda will neutralize any carpet odours, according to carpet cleaning Clapham.

If there is still any vinegar solution left after the cleaning, store it in a spray bottle and use it to treat small spills whenever occur.

How to Get Your Security Deposit Back from Your Landlord

Most of us have experienced leasing an apartment or a house. Furthermore, many have faced negatively behaving landlords. The most common issue in the relationship between the tenant and the property's owner is the security deposit, particularly its returning. In most cases just a small amount of the deposit is returned. To avoid a scenario like that this article will outline some general rules for the reader to follow.

First, before moving in a written rental agreement should be made. The security deposit and its return conditions should be clearly described. Having a copy of the check for the deposit or a receipt could be very helpful later in the time. Your written agreement should say what the security deposit is for, and how it will be returned to you.

In most of the countries there are clear rules. When just a part of the deposit is returned there should be a notice about what kind of repairs and cleanups have been done. There are deadlines for returning the deposit. It is usually about 14 days.

If your contract does not have a moving out deadline then if you decide to do so you should inform the landlord. Give appropriate notice that you will be moving out. Its amount varies according to your lease or to your landlord. Depending on for how long do you rent you have to notice appropriately.

The best solution for getting your deposit in entirety is to hire moving out cleaning services. They will provide assistance if any disputes occur over whether you return the apartment or the house in an appropriate condition. If you choose the right company they will make the place looking better than when you first moved in. Thus, moving out cleaning services are worth it. 

Three Ways to Remove Dried Paint

It is great when you finally move into your new home with your family. But if you want to feel safe there and to allow your children to live in healthy environment, then you have to deal with the cleaning in advance and to make sure your house is dust free. One of the hardest things, every housewife has to deal with, is the dried paint after the builders.

Here are three ways to deal with this problem and especially the paint left on places such as carpets, windows, etc. Of course, calling the professional after builders cleaning services would be better idea, but if you cannot afford it, you can try to handle the task yourself. First, you have to find out the type of the paint. It is important to know whether it is water or oil-based one before you proceed with cleaning.

Read the label on the can and after you already know what kind of paint you have to deal with, you will have to prepare yourself for action. The water-based paint is easier to remove and most manufacturers recommend using only soap and warm water, which you have to apply to the carpet or the upholstery you want to clean.

In case the paint is oil-based, you are going to need a paint thinner. This should be used after the paint is dried, but never used on windows or hard-wood floors. Before you start cleaning, you'd better ask your after builders cleaning services for any advise and test it on hidden area.

Mix White Vinegar and Baking Soda to Clean Your Home

As you probably know, white vinegar and baking soda are two of the most effective natural cleaners, which most people have in their kitchens. Cleaning naturally gives you the opportunity to protect your home from bacteria, germs, grime and dust using only eco-friendly cleaning solutions and techniques. Moreover, using the green cleaning method you help not only yourself, but your whole family.

I do not know whether you know that many of the professional London cleaners use these two ingredients in their work, but this is a fact. Baking soda and white vinegar kill grease, dirt, bacteria, remove odours and disinfect surfaces. So, read the lines below, including information about how to clean with baking soda and white vinegar.

1. If you want to remove stickers from appliances, you need to dampen a paper towel with a little bit of vinegar and apply it over the sticker for a few minutes. The vinegar will help you to remove the sticker easily. Then, use small amount of baking soda and gently remove the leftovers of the glue. Do not forget to rub gently, because otherwise you can scratch the surface. To complete the job, rinse well with water. 

2. Make an all purpose cleaning solution mixing � of water, 1 tablespoon of baking soda and ? cup of white vinegar. Then, pour the solution into a spray bottle. Professional cleaners in London say that you can use the solution to deodorize your bathroom or to clean your counter top and kitchen appliances, too.